NVO / PLST-FF950WH Smart Toilet
Installation
To re-pair a remote to a specific toilet: (1) Unplug both toilets. (2) Remove batteries from the remote you want to pair. (3) Plug in only the toilet you want to pair. (4) Reinsert the batteries into the remote. (5) Within 5 seconds of power-up, press and hold the Down Arrow + Minus button simultaneously until the remote flashes. (6) Press Reset when flashing begins. Repeat for the second toilet with its own remote. If remote will not flash, try reinserting batteries and pressing the combination immediately after the toilet powers on.
Need more help? Call us at 1-866-588-8008 and follow the prompts for Technical Support, or reach out using the contact form on this page.
Comments
0 comments
Article is closed for comments.